Types of chimneys
Contents |
[edit] Introduction
In traditional construction, a chimney is a structure consisting of a wall or walls enclosing one or more flues. Scottish Building Standards define a chimney as: ‘…a structure enclosing one or more flues, but not a flue pipe, and including any openings for the accommodation of a combustion appliance, but does not include a chimney terminal.’ A chimney terminal is another term for a chimney pot, cowl or other structure that finishes off the chimney top.
[edit] Materials
Chimneys can be identified by the materials used in their construction. Common types include:
Brick. This common type of chimney found in residential construction can tolerate temperatures up to approximately 980C. However, since bricks are porous, they can deteriorate under certain climate conditions, and repointing can be necessary to prevent rainwater penetration.
Stone. Also porous, but it can be more expensive than brick. It is generally more difficult to build with stone when the shapes are irregular. Again, repointing can be necessary.
Concrete block. This is an easy to use and affordable material for chimney construction, and offers flexibility in terms of colour.
Metal. Metal is a good conductor of heat, although it can warp at high temperatures and must be lined for protection. Typically flues are made from metal.
Pre-fabricated materials. These factory built structures can be made to certain specifications (such as double-walled, air-cooled and so on).
Wood burning stovepipe chimneys. These vertical structures are attached to stoves and go through the ceiling and out through the roof. Due to the high temperatures of wood burning stoves, these chimneys must be able to withstand high heat. This may be referred to as a flue.
[edit] Chimney classes
[edit] Class 1
Traditional masonry chimneys found on older buildings (built before the 1960s) tend to be designated as Class 1. These chimneys are positioned on an internal or external wall and can contain more than one flue for more than one fire. However, fires cannot share the same flue. These chimneys tend to require liners, due to their age.
[edit] Class 2
Chimneys outfitted with pre-fabricated flues are categorised as Class 2. These chimneys can sometimes be identified by a metal chimney terminal. They are more commonly found in newer properties.
[edit] Related articles on Designing Buildings
Featured articles and news
Listed despite problems with its design.
Zen and the art of cycling exploration.
Design Council Homes Taskforce launched
To support government 1.5 million homes target within UK climate commitments.
The story of this knowledge quarter building.
In ecology, in hydrology, in biology and in architecture.
Creating environments that promote physical, mental, and social well-being.
UK cases of neutral current diversion
Research project looks for example contributions.
Overstocking and macro-economics cause a decline.
The 2024 update of the Common Assessment Standard
Demonstrating organisational capability’ to fulfil roles under the Building Safety Act.
56 recommendations for a better built environment
Published by the CIC ahead of the King’s Speech.
SkillELECTRIC Top 8 Competitors Named
in annual search for the UK’s best student electrician.
CIOB Diversity and Inclusion technical information sheet
Step-by-step guide on implementing D and I practices.
Conservation and the Indian City. Book review.
Reversibility in conservation ethics
Learning from painting conservation.
Where It's AT Podcast launched!
New CIAT Architectural Technology Podcast goes live.